KNC Keys x TofuTypes Tofu リニア スイッチ
P-KN-K-K-0393-S
- 在庫あり、発送準備完了
- 途中の在庫
注: このスイッチは新しい Tecsee 金型から作られたもので、アルミニウムと真鍮のプレートを使用したキーボードとの取り付けに問題があることが知られています。このスイッチは、ポリカーボネートや POM などの柔らかい素材のプレートでのみ使用することをお勧めします。
スイッチは 10 個パックで販売されます。
数量 1 = 10 個のスイッチ。
70 個以上のスイッチを注文すると、豆腐をテーマにしたバッグに入れて発送されます。すべてのご注文にはテーマのステッカーが付属します。
Tofu リニア スイッチの特徴:
- タイプ: リニア
- 取り付けタイプ: PCB マウント (5 ピン)
- 材料
- トップ: PA666
- 下: PA666
- ステム: 13.9mm ナイロン
- スプリング:58g / 22mm
- 工場潤滑済み: スプリングとリーフに軽く塗布されています。 *スイッチに注油することを強くお勧めします。フィルムは必要ありません。
- メーカー: テクシー
- デザイナー: KNC Keys x Tofutypes
- 移動距離: 3.2mm
実際の動作を見て/聞いてください:
This switch has the clackiest bottom out I have ever experienced. I'm not a fan of switches with less than 3.6mm total travel but this is one of the exceptions. I tried this in a switch tester pack with a pom plate I believe so I didn't run into any issues but if the other reviews are anything to go by, I think it might be best to wait for a V2 to come to the market.
If short travel & loud clack is your thing nothing beats this (will duel others over this point).
These switches are stuck in my keyboard plate. I probably will be able to remove them, but I have never had this happen before. It's a shame cause the switches sound and feel ok.
I haven't experiences the creak / tick that others have mentioned but they are definitely tight when pushing into alu plates. You can make it fit, but be prepared for your fingers to hurt.
Smooth and deep sounding with lube but can’t fit in my mod tray/metal plates, picture for reference.
Personally got them for frankenswitches regardless:)
The switches are too tight for metal plates and some tighter tolerance plates in general. The switches themselves creak/tick if you wiggle a keycap with any amount of "force". KNCKeys blamed Tecsee, switches are still being sold with no warning.