KNC 키 x TofuTypes 두부 선형 스위치
P-KN-K-K-0393-S
- 재고 있음, 배송 준비 완료
- 재고가 진행 중입니다.
참고: 이 스위치는 알루미늄 및 황동 플레이트를 사용하는 키보드와 단단히 고정되는 문제가 있는 것으로 알려진 새로운 Tecsee 몰드에서 나온 것입니다. 이 스위치는 폴리카보네이트 및 POM과 같은 부드러운 소재 플레이트에만 사용하는 것이 좋습니다.
스위치는 10개 팩으로 판매됩니다.
수량 1 = 스위치 10개.
스위치 70개 이상 주문 시 두부 테마 가방에 담겨 배송됩니다. 모든 주문에는 테마 스티커가 함께 제공됩니다.
두부 선형 스위치 기능:
- 유형: 선형
- 장착 유형: PCB 마운트(5핀)
- 재료
- 상단: PA666
- 바닥: PA666
- 줄기: 13.9mm 나일론
- 봄: 58g / 22mm
- 공장 윤활: 스프링과 리프에 가볍게 윤활합니다. *스위치에 윤활유를 바르는 것이 좋습니다. 필름이 필요하지 않습니다.
- 제조사 : 테크시
- 디자이너: KNC Keys x Tofutypes
- 이동 거리: 3.2mm
실제로 작동하는 모습을 보고 들어보세요:
This switch has the clackiest bottom out I have ever experienced. I'm not a fan of switches with less than 3.6mm total travel but this is one of the exceptions. I tried this in a switch tester pack with a pom plate I believe so I didn't run into any issues but if the other reviews are anything to go by, I think it might be best to wait for a V2 to come to the market.
If short travel & loud clack is your thing nothing beats this (will duel others over this point).
These switches are stuck in my keyboard plate. I probably will be able to remove them, but I have never had this happen before. It's a shame cause the switches sound and feel ok.
I haven't experiences the creak / tick that others have mentioned but they are definitely tight when pushing into alu plates. You can make it fit, but be prepared for your fingers to hurt.
Smooth and deep sounding with lube but can’t fit in my mod tray/metal plates, picture for reference.
Personally got them for frankenswitches regardless:)
The switches are too tight for metal plates and some tighter tolerance plates in general. The switches themselves creak/tick if you wiggle a keycap with any amount of "force". KNCKeys blamed Tecsee, switches are still being sold with no warning.